Features
3- Point mounted 4 leg crane and base plate, allowing full chassis
movement and articulation. Hydraulic power from engine speed PTO
Quick and easy removal of chip box via use of crane and grab bar
Access door and ladder to rear to facilitate levelling of load and
sheet handling
Unique use of wide angle points allows angles of up to 50o
with full power via PTO to trailer
The removable box may be tipped to either side, side doors swing open,
allowing contents to evacuate unhindered
Road forwarding trailer with sheeted floor for brash and hydraulically
extending rear bolster to give 15' load bed
|
Crane/Chipping/Trailer
- 45o angle of movement between trailer and Chipper. The
chipper can thus be utilised at awkward road and site angles
- Trailer 3-point linkage accepts any linkage mounted chipper etc. and
is fully hydraulically demountable
|
|
Features
- Weight distribution is ideally located on Unimog to provide 50%
front-axle, 50% rear-axle spread when loaded, giving maximum traction
and keeping compaction to a minimum, in-line with the UNIMOG concept
- In-situ Trailer socket positioned clear of the standard 3-way
tipping platform attachment points, to allow body fitting over socket
baseplate
- Offset tipping 21" vertically and 41" horizontally, when tipped
forming heaps of 9' without backing rear tyres onto heap
- Swan neck coupling, base and trailer skid unit only can be supplied
seperate for alternative bodies
- Double acting rams on rear door can be used to level heaps
|
Multi-purpose Offset High Tipping Trailer
- Use as a conventional trailer, tipping to 75o where the
'high tipping' facility is not required
- 230o angle of movement between trailer and UNIMOG.
Trailer can be turned in the same turning circle as the UNIMOG, making
it one of the most manouverable of it's size
|
|
|
Low loading & Tipping Trailer
 |
Box Body Features
- Roof rack
- Access steps
- Customisable compartments
- Mounted to 4-ball frame and demountable
- Fully lockable and sealed roller shutter doors
- Internal lighting and reversing window in front panel
|
|
|
Low loading & Tipping Trailer
 |
Trailer Features
- Removable sides for forklifting onto trailer body
- Unobtrusive stacking area for ramps
- Hydraulic tilting drawbar, raises front of trailer and lowers rear
- Full air ride suspension with facility to exhaust rear axle bags for
loading
- Individual height sensing on axles, assists in minimising drawbar
nose-weight, essential for UNIMOGS
- Full tipping facility
|
